Okuma Impact LU45-IIM 3000MM CNC Lathe
CNC Lathes
Okuma Impact LU45-IIM 3000MM CNC Lathe, 2010 – 4-Axis, Prepped For Automation, Steadyrest
New Replacement – $800,000++ With One Year Lead Time
Service Reports Available Upon Request
Completed in December 2019
Notes: 12.16.19 Replaced Door Inter-locks and door limit switches.
12.17.19 Replaced 3 operator windows. Replaced light glass on Operates light. And started to replace Left door air cylinder. Found an issue with one of the covers behind left side operators door making contact with the Door . We found screws missing. Cover is now secured and out of the way of door.
12.18.19 Completed installing both sides of air cylinders and manifolds on both sides.
12.19.19 Adjusted air cylinder and disassembled turret to begin rebuilding the milling drive.
12.20.19 Replaced all seals other than two due to not being able to get the collar off to replace PN: C5420-354850 and PN: C6114-400580. They are in the Machine crib by the machine. Also replaced the door open limit switches.
$150,000++ worth of work
Max. Swing Over Bed: 33.46″
Max. Turning Diameter: 22.83″
Max. Turning Length: 118.11″
Bar Capacity: 4.33″
Thru Bore: 4.33″
Spindle Speed Range: 3000 RPM
Spindle Motor: 30 HP
Spindle Nose: A2-11
Number of Turrets: 1
Number of Tool Positions: 12 or 10
X-Axis Travel: 11.81″
Z-Axis Travel: 37.4″
Rapid Traverse Rate (X/Z): 787/945 IPM
Control: OSP 300L
Extended Tailstock
Steadyrest
Airblow
Auto Door
